Solution for continuous core temperature monitoring
The temperature variable is a key indicator of the patient’s febrile state. The continuous nature of the measurement is quite difficult to obtain and only a few restrictive devices (rectal, esophageal probes, etc.) allow continuous core temperature monitoring.
eCelsius Medical, class IIB medical device, is a miniaturized electronic ingestible capsule that transmits core temperature data continuously. The capsule communicates in real time with a dedicated monitor, e-Viewer Medical, at a sampling period of 30 seconds. This monitor allows data recording, and an alert may be triggered if a threshold has been exceeded. The communication distance between the capsule and the monitor ranges from 1 to 3m (depending on environment and patient).
The capsule also has its own memory. In the case of a communication disruption between the monitor and the capsule, an a posteriori automatic synchronization of the data is performed.
Specifications eCelsius Medical
Delivered sterilized
Storage: 2 years
Weight: 1.7g
Size: 17.7mm x 8.9mm
Sampling period: 30sec
Accuracy: 0.2°C
Calibration range: 25°C to 45°C
FIFO memory: 2000 data capacity
Data transfer: RF transmission (433 – 434MHz)
Communication range: 1-3m (environment and patient dependant)
Life duration: 20 days
Specification e-Viewer Medical monitor
3 capsules per monitor
Multichannel: 7 monitors in parallel
Storage: 150 185 data per capsule
Autonomy: 24/36h
Size: 120mm x 70mm x 15mm
Activator size: 69mm x 59mm x 31mm
The eCelsius medical solution allows continuous core temperature monitoring to diagnose or control the patient’s febrile state. The capsule is removed on the natural way; the operational lifetime corresponds thus to the transit time (24-48h on average). The capsule is a single-use device delivered sterile and in a stand-by mode. An activation box allows you to associate the e-Celsius® Medical capsule with the e-Viewer® Medical monitor. A single monitor can manage up to three capsules simultaneously for mid/long term uses.
A dedicated interface, PC and MAC compatible, retrieves data for archiving or clinical use. Three main applications will be firstly covered: infectious diseases, oncology and sleep disorders.
Infectiology
Temperature monitoring in infectiology is critically important; fever is indeed a fundamental clinical sign facilitating the implementation of an early and appropriate therapy.
Continuous core temperature monitoring, without human intervention, make possible to reduce medical response times and improve diagnosis reliability, patient comfort and patient care.
Cancerology
Early detection of peak fever is critical for patients treated with chemotherapy and presenting a high risk of febrile illness (aplasia, febrile neutropenia, …). The possibility to continuously monitor the evolution of the temperature variable allows to early detect fever pic and thereby reduce the response time for medical staff.
Sleep
The core temperature is a key indicator of the biological rhythmicity of the subjects. Continuous monitoring of this variable allows to characterize the circadian rhythm of the core temperature, which is an essential tool for sleep analysis and the diagnosis of sleep disorders.
Service is essential to keep medical equipment operational and safe. Our Nordic service team consists of experienced service technicians stationed across the Nordic countries. Our service technicians are ready to take on your every service need.”
The dual-valved LiteAire MDI holding chamber: Collapsible, disposable paperboard design.
The LiteAire® collapsible MDI holding chamber is a unique MDI holding chamber and an innovative alternative. LiteAire’s unique dual-valved MDI holding chamber design delivers pop-up convenience and effective drug output at a fraction of the cost of most plastic holding chambers. In many clinical settings, the LiteAire can reduce costs by replacing existing rigid plastic holding chambers or inefficient spacers with a paperboard alternative. The unique design allows the LiteAire to be reused by a patient over multiple doses and meets and often exceeds the performance of plastic holding chambers.
A fresh breath of air
Pinnacle is a peak flow meter which measures the patient’s maximum speed of expiration, or peak expiratory flow rate (PEFR or PEF). The Pinnacle Peak Flow Meter helps asthma patients breathe more freely. Measuring both PEFR and PEF, it provides doctors with important insight into the severity and development of the condition, making it easier to prescribe adequate treatment. Made from medical grade polymers and stainless steel, the Pinnacle is a durable, reliable and easy-to-use device that is used worldwide to help give asthma patients a fresh breath of air.
Powering high performance aerosol drug delivery
Throughout the hospital, the Aerogen Pro-X Controller powers the Aerogen Solo in one easy to use device. Powering Aerogen technology at every stage of patient care including mechanical ventilation, HFNC, NIV, and spontaneous breathing. The Aerogen Pro-X Controller portable power source with 30-minute and continuous modes is specifically designed to provide high-performance aerosol medication treatments throughout the hospital.
Innovative phototherapy cover made of a high-tex material
BiliCap® is made of a 3-layered functional specialty knit fabric. A highly elastic, breathable membrane in the core assures the phototherapy cover’s imperviousness to light. The 3D knit spacing fabric underneath ensures optimum noise attenuation, provides an anti-slip effect and permanently retains the cover’s shape.
Additionally, the material is characterised by low weight and contains an active substance with permanently antimicrobial effect.
BiliCap® optimally shields the surrounding treatment places against the high light intensity while providing fast and flexible access via 4 side and 2 head/foot flaps. The one-size design allows flexible use, fitting all incubator models commonly available on the market. BiliCap® is certified according to Oeko-Tex® Standard 100, washable up to 95 °C and suitable for tumble-drying. Guaranteed permanence of function and colour even in the case of frequent laundering. Available in 2 colours with individual ornaments and embroidery.
Timik ApS
Sivlandvænget 27B, st. th.
5260 Odense S
Tel: +45 8230 6700
Org.nr 36089210
